(A) Perkhidmatan Peralatan, Analisis dan Sewaan Makmal
SENARAI MAKMAL
Jabatan Kejuruteraan Aeroangkasa dilengkapi dengan sembilan (9) makmal pengajaran, penyelidikan serta perkhidmatan yang menawarkan pelbagai analisis seperti berikut;
Kod | Nama Makmal | Kategori |
Kelas | Lokasi |
PYB |
Hubungan |
|
1 | Makmal Pendorongan | Pengajaran & Penyelidikan | Makmal Bukan kimia | Blok H2, H2.3 | Nasir Johari |
03-97691581 mnasirj@upm.edu.my |
|
2 | Makmal Aerodinamik | Pengajaran, Penyelidikan & Perkhidmatan | Makmal Bukan Kimia | Blok H, KAA001 | Saffairus Salih |
03-97696469 saffairus@upm.edu |
|
3 | Makmal Struktur Aeroangkasa | Pengajaran, Penyelidikan & Perkhidmatan | Makmal Bukan Kimia | Blok H, KAA006 | Ahmad Saifol Abu Samah |
03-97691580 asaifol@upm.edu.my |
|
4 | Makmal Bahan dan Teknologi Komposit | Pengajaran & Penyelidikan | Makmal kimia | Blok H2, H2.2 | Nasir Johari |
03-97691581 mnasirj@upm.edu.my |
|
5 | Makmal Avionik | Pengajaran & Penyelidikan | Makmal Bukan kimia | Blok H, KAA005 |
|
03-97691579 m_azfar@upm.edu.my |
|
6 | Makmal Kawalan dan Getaeran | Pengajaran & Penyelidikan | Makmal Bukan kimia | Blok H, KAA007 | Mohd Suhardi Ali |
03-97696498 m_suhardi@upm.edu.my |
|
7 |
Makmal Fabrikasi Aeroangkasa |
Pengajaran & Penyelidikan | Makmal Bukan kimia | Blok H, KAA004 | Ahmad Saifol Abu Samah |
03-97691580 asaifol@upm.edu.my |
|
8 | Makmal Rekabentuk Aeroangkasa | Pengajaran & Penyelidikan | Makmal Bukan kimia | Blok H2, H2.4 | Hermi Othman |
03-97691582 hermi@upm.edu.my |
|
9 | Makmal Sistem Angkasa | Pengajaran & Penyelidikan | Makmal Bukan kimia | Blok H2, H2.1 | Mohd Azfar Roslan |
03-97691579 m_azfar@upm.edu.my |
Senarai penuh peralatan pengajaran makmal di jabatan boleh dirujuk di SINI
Senarai Alat, Penyelenggaraan dan Penentukuran jabatan boleh dirujuk di SINI
Kadar yang dipaparkan adalah dipetik dari Minit JKTK 6/4(2019)
Kadar bayaran ditawarkan adalah dibahagikan kepada 3 kategori;
Kategori | Keterangan |
A | Pelajar UPM, Staf UPM, Persatuan UPM, PTJ UPM |
B | Kerajaan, Badan Berkanun, Agensi Kerajaan |
C | Swasta, Persendirian, Anak Syarikat UPM, Koperasi, Badan Perniagaan kerajaan |
Bil | Nama alat sewaan/Perkhidmatan/Ujian | Keterangan | Lokasi | Kadar (RM) | |||
Saiz ujian/saiz sampel/sewaan | Kategori A | Kategori B |
Kategori C |
||||
KAA1 | Fire testing | A testing facility for the fire test according to the ISO2685 Propane-air burner. The test facility and experimental setup are in accordance with the ISO2685 standard requirement. The test can be conducted for fire resistance (5 minutes) and fire proof (15 minutes) testing at temperature of 1100 deg C and heat flux of 116 W/m2. | Makmal Pendorongan | Per Sample | 240 | 320 | 400 |
KAA2 | Optical microscopy with Image Analysis software | Microscope with digital camera for materials science image analysis | Makmal Bahan dan Teknologi Komposit | Per Sample | 220 | 290 | 360 |
KAA3 | Ultrasonic homogenizer for nanofillers dispersion | an ultrasonic homogenizer has a tip which very rapidly vibrates, causing bubbles in the surrounding solution to rapidly form and collapse. This creates shear and shock waves which tear apart cells and particles. | Per Sample | 170 | 220 | 280 | |
KAA4 | Vacuum furnace | Furnace for borating, forging, hardening, heat treatment, powder carburization, pre-heating, shrink fitting, tempering with maximum temperature : 1300 °C (2,372 °F) | Per Hour | 230 | 310 | 390 | |
KAA5 | Vacuum infusion | Vacmobile 20/2 For Resin Infusion | Per Sample | 250 | 330 | 410 | |
KAA6 | Vacuum oven | A vacuum oven, or vacuum drying oven, is primarily used to expedite the drying process by employing vacuum and heat. As the pressure decreases, the boiling point of the solvent also decreases, allowing the vacuum oven to remove moisture and volatile substances at lower temperatures. | Per Hour | 230 | 300 | 380 | |
KAA7 | Water absorption test (Waterbath) | the water absorption test, the specimens are dried in an oven for a specified time and temperature and then placed in a desiccator to cool. Immediately upon cooling the specimens are weighed. The material is then emerged in water at agreed upon conditions, often 23°C for 24 hours or until equilibrium. | Per Sample | 240 | 320 | 400 | |
KAA8 | Fatigue Testing | A testing procedures to measure the fatigue properties of nominally homogeneous materials by subjection to uniaxial forces. ASTM E606 is intended as a guide for fatigue testing performed at low and high cycles. Results can support such activities as materials research and development, mechanical design, process and quality control, product performance, and failure analysis | Makmal Struktur Angkasa | Per Hour | 190 | 250 | 310 |
KAA33 | Low Velocity Impact Test / Drop Weight Impact Tester (kadar KMP54) | The IM 10 range from Imatek are a highly versatile range of drop weight impact testers for performing a wide range of medium energy tests on materials, specimens and end products of various geometry. | Per Hour | 40 | 50 | 60 | |
KAA9 | Crop monitoring and maintenance using UAV | Quadcopter for crop monitoring and it's maintenance | Makmal Sistem Angkasa | Per Acre | 640 | 850 | 1,060 |
KAA10 | Photo and video shooting for events using UAV | Quadcopter for video shooting for event | Per Hour | 80 | 110 | 140 | |
KAA11 | Construction site monitoring using UAV | Quadcopter for site monitoring | Per Hour | 80 | 110 | 140 | |
KAA12 | 3D Printer (Tanpa Filamen) | Per Hour | 180 | 240 | 300 | ||
KAA13 | Sewaan Makmal Komputer | A computer laboratory that equipped with 40 personal computers and intergrated server for catia, nastran/pastran software | Makmal Rekabentuk Aeroangkasa | Per Hour | 320 | 430 | 540 |
KAA14 | Open Loop Wind Tunnel, OLWT (Speed: 35 m/s , Test section size: 1m x1m x 2.5m) | To simulate low wind speed (40 m/s), Test section size : 1mx1mx2.5m | Makmal Aerodinamik | Per Hour | 1,370 | 1,820 | 2,280 |
KAA15 | Closed Loop Wind Tunnel, CLWT (Speed: 50 m/s, Test section size: 1m x 1m x 3m) | To simulate low wind speed (50 m/s), Test section size : 1mx1mx3m | Per Hour | 1,400 | 1,870 | 2,340 | |
KAA16 | Open Jet Wind Tunnel, OJWT (Speed: 7 m/s, Test section diameter: 2m) | The open-jet wind tunnel is a blower type, open circuit facility. A steel frame at the base of the facility provides stability while the combination of aluminum composite panels and extruded aluminum frame results in a light weight yet strong structure. | Per Hour | 1,370 | 1,820 | 2,280 | |
KAA17 | Six Component Balance System | To measure the force in six axis direction during wind tunnel testing | Per Hour | 1,400 | 1,870 | 2,340 | |
KAA18 | Hampden Wind Tunnel (Speed: 18 m/s, Test section size: 20cm x 20cm x 60m) | To simulate low wind speed (18 m/s), Test section size : 20cmx20cmx60m | Per Hour | 700 | 930 | 1,160 | |
KAA19 | Air Flow Bench With Smoke Visualization (Speed: 20 m/s, Test section size: 6.5cm x 24.5cm x 72.5m) | To simulate low wind speed (20 m/s), Test section size : 6.5cmx24.5cmx72.5cm | Per Hour | 700 | 930 | 1,160 | |
KAA20 | Smoke Generator Machine (Fog Machine) | Generating fog in areas which are hard to be accessed with the basic device for applications such as Cleanroom – Research Activities – Filter Integrity Test – Independent Filter Certifiers | Per Hour | 700 | 930 | 1,160 | |
KAA21 | Particle Image Velocimetry (PIV) System | To measure the velocity of wind in sheet form and to analyze flow pattern in 2 dimensional | Per Hour | 1,380 | 1,840 | 2,300 | |
KAA22 | Digital High Speed Video Camera | To photograph of relatively fast-moving object at high capture rate up to 287,000 fps under 128 X 4 resolution | Per Sample | 140 | 190 | 240 | |
KAA23 | Single Stage Compressed Gas Gun | To conduct ballistic impact studies | Per Sample | 140 | 190 | 240 | |
KAA24 | DAQ NI USB (cDAQ 9174) | Makmal Kawalan dan Getaran (Kadar KMP56) | Per Hour | 40 | 50 | 60 | |
KAA25 | Voltage Input Module NI 9201 | Per Hour | 40 | 50 | 60 | ||
KAA26 | Temperature Input Module NI 9211 | Per Hour | 40 | 50 | 60 | ||
KAA27 | Bridge Analog Input Module NI 9237 | Per Hour | 40 | 50 | 60 | ||
KAA28 | Analog Output Module NI 9263 | Per Hour | 40 | 50 | 60 | ||
KAA29 | Digital Module NI 9375 | Per Hour | 40 | 50 | 60 | ||
KAA30 | LMS (kadar KMP57) | Makmal Fabrikasi Aeoangkasa | Per Hour | 40 | 50 | 60 | |
KAA31 | Impact Hammer (kadar KMP54) | Per Hour | 40 | 50 | 60 | ||
KAA32 | LMS Test Lab Software (kadar KMP57) | Per Hour | 40 | 50 | 60 |
TERMA DAN SYARAT [KLIK SINI]
CARA-CARA MEMOHON [KLIK SINI]
Bil | Perkara | Papar |
1 |
Borang Permohonan Perkhidmatan (Manual) |
Papar |
2 |
Borang Perkhidmatan Google Form |
Papar |
3 |
Buku Panduan keselamatan Jabatan |
Papar |
4 |
Borang keselamatan |
Papar |
5 |
Borang Permohonan Ruang Pelajar Siswazah |
Papar |
- Sila hantar borang yang lengkap kepada;
Normalina Jamaluddin
Jabatan Kejuruteraan Aeroangkasa
Fakulti kejuruteraan
Universiti Putra Malaysia
43400 UPM Serdang
Selangor
Tel: 03-769 4680
012-2661652 - Bayaran boleh dibuat di SINI
- Emelkan resit yang diterima dalam emel kepada no.j@upm.edu.my