---

PUAN ROBIAH YUNUS

Email: robiah@eng.upm.edu.my
Tel: 03-9486101 ext. 2108
 

M.Sc Integrated Design of Chemical Plant (Leeds University, England)

B.Sc Chemical Engineering (Alabama University, USA)

Graduate Member of IChemE England, March 1995

Graduate member of Malaysian Board of Engineer, March 1995

• Computer Aided Process Simulation and Optimisation using commercial
       process simulation such as Aspen Plus, PRO II and Chemshare.
•  Process Integration for optimum energy consumption in gas Processing Plant
       and oleo chemical plant
• Prediction of physical and thermodynamic properties of high molecular weight

                   compounds such as palm oil and its products.

• Production of Methyl Ester from Palm Oil Using Immobilised Lipase, Proceedings of Faculty of Chemical and Natural Resources Engineering Research Seminar, June 1993.

• Estimation of Ideal Heat Capacities for High Molecular Weight Compounds, FKKKSA Buletin, Jld.6, No.1,1992.

• The application of Short Cut Models in Distillation Control Design, Proceedings of the 6^th Symposium of Malaysian Chemical Engineers, June 1990.

• Physical and Thermodynamics Properties of Palm Oil, M.Sc. Project Report, University of Leeds, UK, 1989.

• Calculations of Distillation Columns Using Short Cut Models for Design and Control, M.Sc. Dissertation, University of Leeds, UK, 1989.

• Adsorption of Free Fatty Acids from Crude Palm Oil Using Rice Husk Ash, Proceedings of the Symposium on Tropical Natural Resources Engineering Research Seminar, December 1993.

• Estimations of Physical Properties of Palm Oil Based Methyl Ester Using Aspen Plus, Proceeding of Faculty of Chemical And Natural Resources Engineering Research Seminar, July 1994.

• Development of Physical Properties Data Bank for Palm Oil Based Methyl Esters, Proceedings of the 10^th Malaysian Chemical Engineers Symposium, USM, Penang, August 1994.

• Process Integration of an Oleo Chemical Plant, presented at COSTAM'94, Kuala Lumpur, August 1994.

 
• Aspen Plus Simulation and Process Integration of an Oleo Chemical Plant, ASPEN WORLD'94, Boston, MA, USA, November 1994

 
• Minimisation of Energy Consumption in a Cryogenic Plant Through Process Modification and Optimisation using Steady State Process Simulator, Proceedings of 11^th Malaysian Chemical Engineers Symposium (SOMCE'95), UTM, Terengganu, June 1995.

 
• Development in Physical Properties Compilation of Palm oil based Oleo Chemicals, Proceedings of COSTAM'95, Kuala Lumpur, August 1995.

 
• Integrasi Proses Loji Pemprosesan Gas dan Pemoptimuman Perolehan Semula Tenaga, Proceedings of Faculty of Chemical and Natural Resources Engineering Research Seminar, August 1995

 
• Multimedia in Chemical Engineering Education and Training, Universiti Teknoloji Malaysia Experience, Proceedings of 11^th Malaysian Chemical Engineers Symposium (SOMCE'95), UTM, Terengganu, June 1995.

 
• Development in Physical Properties Data Compilation Software for Palm Oil Based Oleo Chemicals, submitted to IEEEE Conference on Multimedia in Engineering Education, Victoria, Australia, 1996.

This page was last edited by Suryani Kamarudin on 11 August 2000